Notch
1.1.2
Overview of Type II Camera
Trim Ring
Clip Plate
Mounting Base
Enclosure
DC 12V
Video Cable
Camera
Power Cord
Overview of Type II Camera
2
Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
If the product does not function properly, please
contact your dealer or the nearest service center. Do
not disassemble the camera for repair or
maintenance by yourself.
2.1
Installation of Type I Camera
2.1.1
Ceiling Mounting
Steps:
1.
Disassemble the turret camera by rotating the
camera to align the notch to one of the marks, as
shown in 0.
Mark
Disassemble the Camera
2.
Pry the mounting base to remove the mounting
base with the camera body with a flat object, e.g., a
coin.
3.
Attach the drill template (supplied) to the place
where you want to fix the camera, and then drill the