Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and
“Cautions”
Warnings:
Serious injury or death may occur if any of
the warnings are neglected.
Cautions:
Injury or equipment damage may occur if any
of the cautions are neglected.
Warnings
Follow
Cautions
Follow these
these safeguards to
precautions to prevent
prevent serious injury
potential injury or
or death.
material damage.
Warnings
In the use of the product, you must be in strict
compliance with the electrical safety regulations
of the nation and region.
Refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with AC
24V or DC 12V according to the IEC60950-1
standard. Refer to technical specifications for
detailed information.
Do not connect several devices to one power adapter
as adapter overload may cause over-heating or a fire
hazard.
Make sure that the plug is firmly connected to the
power socket.
When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cable, and
then contact the service center.
If the product does not work properly, contact your
dealer or the nearest service center. Never attempt
to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before
using the camera.
Do not drop the camera or subject it to physical
shock.
Do not touch senor modules with fingers. If cleaning
is necessary, use clean cloth with a bit of ethanol
and wipe it gently. If the camera will not be used for
an extended period, replace the lens cap to protect
the sensor from dirt.