Vezco VZ-DVR-2M08-1HD, Быстрый старт

Страница: 20 / 26

Digital Video Recorder Quick Start
Guide
20
You can also click Menu > Camera > Signal Input Status to configure the signal input.
Steps:
1.
Enter the Signal Input Status
interface. Menu > Camera > Signal
Input Status
2.
Check the checkbox to select different signal input types: TVI, AHD/CVBS or IP
Figure 3. 8
Configure Signal Input Type
3. Click Apply to save the settings.

The AHD signal input is supported.

Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04..., and
each two channels in the same group must be connected with the same type of video source
selected on GUI. For example, when the TVI/CVBS signal mode is selected, then either TVI or
CVBS signal input can be connected to the channels in the same group; and when the AHD signal
mode is selected, only the AHD signal input can be connected.

In the live view interface, when there is no video signal of the analog channel, the corresponding
connectable video signal type message can be displayed on the screen.
3.6 Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup
Wizard starts once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard.
Follow