Vezco VZ-DVR-2M08-1HD, Быстрый старт

Страница: 14 / 26

Digital Video Recorder Quick Start
Guide
14
2.3 RS-485 and Controller Connection
Typical Connection:
Figure 2. 5 Controller Connection A
To connect PTZ to the DVR:
1.
Disconnect pluggable block from the RS-485 terminal block.
2.
Press and hold the orange part of the pluggable block ; insert signal cables into slots and
release the orange part. Ensure signal cables are in tight.
3.
Connect A+ on PTZ to D+ on terminal block and B- on controller to D- on terminal block.
Fasten stop screws.
4. Connect pluggable block back into terminal block.
Make sure both the controller and DVR are grounded.