Vezco PRO-NVR-Smart, Быстрый старт

Страница: 27 / 30

Quick Start Guide of PRO-NVR-Smart
26

Stream Type : Select stream for recording.

Pre-Record : Record video from periods preceding detected events. The default
value is 5 seconds and not editable.

Post-Record : Record video from periods following detected events. The default
value is 10 seconds and not editable.

Video Files Storage: Select the storage mode for the recorded videos.
Overwrite: Overwrite the oldest videos when disk or allocated quota is full.
Expired Time: When this option is selected, NVR will automatically delete the
oldest videos after the specified retention period. This method allows you to define
the longest time period to keep the videos as desired and the actual retention
period for the videos depends on the allocated quota.

Enable ANR : Turn the automatic network replenishment on to temporarily store
the video in the camera when network fails and transport the video to NVR when
network recovers.
4. Click Add to add the rule and back to the recording list page. You can also click Add
and Continue to save the settings and continue to add other recording settings.
Playback
Purpose:
After configuring the recording settings for the camera via the Web Client, the video files
can be searched and played back remotely via Control Client.
Note: Here we only introduce the playback of continuous video files. For other operations
about playback, please refer to the User Manual of NVR Control Client .
Click Playback on the control panel to enter the Playback page.
Searching Video Files for Playback
Steps:
1. Enter the Playback page.
2. Click-and-drag the camera, or area to the display window, or double-click the camera,
or area to start the playback.
Playing Video Files
The timeline indicates the time duration for the video files, and the video files of different
types are color coded. You can hover cursor over the timeline to take a quick view of the
video thumbnails of that time. Drag the timeline or click the thumbnail to play back the
video of the specific time.
You can click
or to zoom in or zoom out the timeline bar. You can also use the
mouse wheel to zoom in or zoom out on the timeline.
You can drag the timeline bar to go to the previous or the next time period.
Move the mouse to the playback window and click
and set the locking duration to
protect the video file from being overwritten when the HDD is full and it cannot be deleted
as well.
Event Configuration
Purpose:
In NVR Web Client, you can configure event detection settings and check the event logs
via Control Client.