VEVOR VVPS215BUS, Руководство пользователя

Страница: 8 / 12

07
If the pump comes with a power cord, no wiring is needed.
If not, wire the pump as below:
• Ground wire connects to the ground terminal.
• If your power supply has two hot wires, connect them to each
terminal marked with “Line”; If your power supply has one hot
wire and one neutral wire, connect either of them to either of the
terminal marked with “Line”.
• Turn on the power and run the pump.
For Two Speed Pumps
Make sure that the electrical supply available is suitable for the
motor’s voltage, phase, and cycle, and that the wire size is adequate for
the HP (kW) rating and distance from the power source.
Warning:
All electrical wiring must be performed by a licensed electrician.
Warning:
All electrical wiring must conform to local codes and NEC regulations.
Warning:
Use copper conductors only.
Recommended
Wire Size 0-50 ’
No. 14
No. 14
No. 14
No. 12
No. 14
No. 10
No. 14
No. 10
No. 14
No. 12
Branch Fusetron
Amps
15
15
6.25
20
9
30
15
30
12
20
Circuit Breaker
Amps
15
15
10
20
10
30
15
30
15
20
Volts
115
115
230
115
230
115
230
115
230
230
Rated
KW
0.37
1.88
1.55
1.1
0.75
0.55
HP
0.5
2.5
2
1.5
1
0.75
Electrical Guidance for 60Hz Single phase motors