VEVOR VVPS215BUS, Руководство пользователя

Страница: 7 / 12

06
WIRING
For Single Speed Pumps
If the pump comes with a power cord, no wiring is needed.
If not, wire the pump as below:
230
115
How to wire 230V
• Make sure the switch is at the 230V side.
• Ground wire connects to the ground terminal.
• Hot wire connects to terminal 1 or 3; a neutral wire connects to terminal 3 or 1. Either hot wire or
neutral wire is compatible with terminal 1 or 3.
• Turn on the power and run the pump.
How to wire 115V
• Make sure the switch is at the 115V side.
• Ground wire connects to the ground terminal.
• Hot wire connects to terminal 1 or 3, a neutral wire connects to terminal 3 or 1. Either hot wire or
neutral wire is compatible with terminal 1 or 3.
• Turn on the power and run the pump.
WARNING:
All electrical wiring must conform to local codes, regulations, and the NEC.
WARNING:
Turn off power to pump before working on electrical connections.