12
/12
to the local 2.4G WiFi, the current IP address of the controller or the domain name
vigostick.local
can still be
opened to enter the web management interface. You can open
About
page of the controller to check the IP address.
Network status
:
There is a dot in the upper left corner of the main page.
The
RED
dot indicates that
VIGO-STK****
hotspot is active, and the
GREEN
dot indicates that the controller has connected to Local WiFi.
5. Restore factory settings
If the mechanical movement of the machine is smooth, but the engraving movement appears stuck, or the stepper
motor does not move, please try to restore the factory settings of the main-board. The recovery method is as follows:
Method 1:
VigoWorks
software (For Windows) and run it. Click the button
Connect
.
After the software connected the machine successfully, click
Settings
. On
the settings window, Click
Restore Factory
button, then reboot the
machine.
Method 2:
Run Candle software and send command
$RST=*
to the machine, then reboot the machine.
6. Assembly video and online guide
Please scan the QR code below to watch the machine assembly video.
If the U disk in the machine kit can't be
read, please scan the QR code to see how to download the software and related documents.
Powered by VEVOR 2020
