Vetus VF4.140E, Руководство по установке

Страница: 63 / 72

400202.01
61
vetus®
Installation manual VF4 VF5
5.3.16 Mechanical setting of the stroke of the gearbox
IMPORTANT: Check before switching on for the first time that the power supply to the control box
is connected after the engine key switch.
Notes on the strokes setting:
1: The procedure described has an operational nature and must therefore be carried out while the engine is run-
ning and the vessel is sailing. It is important to pay the greatest attention to the settings for forward and reverse
in order to prevent sudden or uncontrolled movements of the vessel. If necessary ask for help from a second
person who can switch the engine on and off as required.
2: Stern drive and outboard engines: if it is not possible to set the strokes when the engine is running so that
this has to be done when the vessel is not in the water, then simulate the rotation of the screws manually to
make coupling the gearbox easier.
3: If the strokes of the gearbox are known it is sufficient to physically measure the movement of the cursor on
the control box in the various positions to be set.
Specific parameters
IMPORTANT: changing factory values could cause the system to malfunction. Therefore, it is advisable not to
change them unless our technician advises this.
IMPORTANT: on the system with two engines, the strokes of the stern driver (in case of stern driver engines)
has to be set checking if it is request a contro-rotation functioning of the propellers. The parameter A0 has the
function to invert the movement of both push-pull cables.