Vetter ManuTel G2 MTGZ16/10/16/A, Руководство по эксплуатации

Страница: 30 / 43

6.2 Routine check
NOTICE!
Have the Manu Tel ® G2 checked by an expert at least once a year (more
frequently for heavy usage or multiple-shift operation). Carry out the test
based on the currently relevant standard. The expert will specify the
scope of the test and the test interval.
Personnel: n Service specialist
Protective equipment:
n
Protective work clothing
n Industrial helmet
n Protective gloves
n Safety shoes
6.3 Wear check for the slip-on coupling
WARNING!
Danger of accident due to wear!
The material thickness must be at least 3 mm at each point of the slip-on
coupling. (Fig. 16). The slip-on coupling needs to be replaced if the mate-
rial thickness is less than 3 mm due to wear. If it is not replaced, material
failure is to be expected when loaded. There is a danger of accident if the
load falls.
– Test the wear limit of the slip-on coupling on a regular basis.
– Replace the slip-on coupling immediately if they fall below the wear
limit!
Personnel: n Driver of industrial trucks
Protective equipment: n Protective work clothing
n Industrial helmet
n Protective gloves
n
Safety shoes
Maintenance
Wear check for the slip-on coupling
V1.09/2019 ManuTel ® telescopic fork arm Type G2 30