To maximize the life of your computer, it is important that you
keep all of its components clean and always dry off any moisture
from the chest transmitter before putting it away. For cleaning, use
only mild soap and water. Be careful to never use abrasive
cleansers or chemicals as they will cause permanent damage.
For safekeeping, always store your computer in a mild and dry
location. Be sure not to expose it to extreme temperatures by
leaving it in direct sunlight or in a hot or freezing cold car for
extended periods of time.
The transmitter will automatically shut itself off once you have
disconnected it from your chest. However, it is important to
thoroughly dry it off after every use, since moisture on the
electrodes can cause it to remain on longer.
Be sure not to twist or bend the electrode portions of the belt
excessively (never bend them backwards), especially when storing
it. This can permanently damage their conductivity and cause
mechanical damage to the internal circuit.
CARE & MAINTENANCE
• Blank Screen or Missing Digits?
This can be an indication of mechanical shock damage, a dead
battery or possibly moisture damage. If this occurs, you should
first try an All Clear Total Reset. Otherwise send it in for service.
Repairs should only be done by Vetta or an Authorized Vetta
Dealer.
• Stuck or Erratic Display?
If your computer should ever get stuck or act erratically due to
dropping it, static shock or for some other unforeseen reason,
the All Clear Total Reset feature will allow you to reset the unit
and reprogram all settings. To perform this function, press all
three buttons simultaneously and hold for 5 seconds in any
screen mode. When the computer is reset, the master screen
will appear and show all LCD segments for 3 seconds. The
computer will then automatically enter Initial Setup mode to
be reprogrammed.
