The V100 series computers are programmed with a Bi-Level Memory
which returns to the last screen function accessed between the
upper and lower screen modes. See illustration for this sequence
and instructions on how to advance from one screen to the next.
V100HR SCREEN DISPLAY
SEQUENCE: BI-LEVEL MEMORY
Scrolls through lower level screen symbols and
Freeze Frame display screens. Hold 2 seconds in
HR/% screen mode to display HR data from Heart
Rate Memory Storage and Recall. Hold 2 seconds in
SPD/CAD* screen to display Average and Maximum
Cadence.
*(Optional)
Scrolls through upper level screen symbols and
Heart Rate Memory Storage and Recall screens.
Press and hold 2 seconds in any primary screen
mode to activate Freeze Frame memory. Resets RT
to zero for Service Timer.
Starts and stops the timers and Stopwatch and is
used to reset timers, Stopwatch and other ride data
to zero. Exits Normal Operating Mode (NOM) Setup
and advances to NOM System Check and either the
SPD/DST or HR/% screen mode.
With RT/TT timers turned OFF, hold both buttons
simultaneously for 2 seconds in the SPD/DST
primary screen to enter NOM Setup for bicycle
functions. Hold simultaneously for 2 seconds in the
HR/% screen mode to enter NOM Setup for heart
rate functions.
Button #1
Button #2
Button #3
Buttons #1 &
#2
OPERATING MODE
