VETEC SPM19, Инструкция по эксплуатации

Страница: 12 / 16

DE
EN
4. Spare parts
Only original spare parts may be used.
Battery: BAT5
Battery charger: BLG5
5. Conduct in case of faults
In case of any fault, the Power Tool will be switched off and remain disabled. Th e service LED
will glow red or orange. You can proceed with your work only after the battery has been ex-
changed or removed for short time and is then re-inserted (RESET). If the malfunction persists
even after such a “reset”, please contact after-sales service.
5.1 Codes of the operating/service LED display
LED-Display Cause / remedy
after application (cycle)
steady green Working value OK
fl ashing red/green Working value OK but service interval exceeded / Service
fl ashing red Working value is at the limit / contact the service center
steady red Working value is outside range / return device to customer service
steady orange
Temperature is outside the tolerance range /
cool or warm the device
after power on (battery insertion)
steady green Power tool is ready for operation
steady orange
Temperature is outside the tolerance range /
cool or warm the device
steady red Battery empty / change the battery.
Th e fault massages can be read out using the analysis software. Please return the faulty work-
ing diagrams to our service center.
5.2 Codes of the supply voltage LED
LED-Display Cause / remedy
after application (cycle)
fl ashing red Battery charge is below 10% / Change the battery.
steady red Battery empty / change the battery.
after power on (battery insertion)
steady green Power tool is ready for operation
steady red Battery empty / change the battery.
12
SPM19