
HD453 GB Issue 08
6
Damaged appliances shall not be used. (Cracked or broken parts may create a risk of fire if
oxygen can leak out or electric shock if water can leak in. Missing or damaged parts may expose
live or hot parts).
The mains cable is specially prepared and may only be replaced by Brinsea or their authorised
agent. Do not use if the cable becomes damaged.
4.1
Please identify each part and check that they are all present and undamaged. If there are any parts
damaged or missing please contact your retailer or Brinsea Products (at the address at the end of
the document).
4.2
Note that if your intensive care unit has been ordered with additional options (such as the Brinsea
Advance Humidity Pump) separate instructions and component lists apply.
4.3
Check also that the electrical supply matches the machine’s requirements (marked on the technical
label on top of the cabinet).
4.4
To register your new Vetario product please visit www.vetario.co.uk and follow the link on the right
hand side of the home page to qualify for your free 3 year guarantee.
5
Location and Assembly
Ensure that the room temperature cannot drop on a cold night. Ideally thermostatically control
the room at between 20 and 25°C (68 and 77°F). Never allow the room temperature to drop below
15°C (59°F) and ensure that the unit cannot be exposed to direct sunlight.
The apparatus must only be used in a well-ventilated room away from potential sources of heat
or ignition. NO SMOKING.
Do not use in a confined location
– see figure 5.0 below. There must be a minimum 30cm free
space to each side and above the unit. (Oxygen concentration in the air around the incubator
may rise
significantly if ventilation isn’t provided or the space around the incubator is confined.
This may create a fire hazard).
Figure 5.0
– Minimum clearance to walls and other surfaces
Remove all electrical devices that are within 90cm of the incubator. Place the incubator at least
90cm away from power sockets. Ensure there are no power sockets or electrical items directly
under the shelf or table supporting the incubator. (Oxygen gas may sink through air and cause
fire in other equipment).
Minimum
30cm