Vestil CART-200-ALUM, Инструкция по эксплуатации

Страница: 2 / 4

CART-200-ALUM (HYDRAULIC LIFT TABLE)
1.
Use & applicable range
It is a convertible vehicle using for lifting and transporting in workshop, workshop, warehouse and wharf,
etc.
2. Basic Data:
Model: TF15 ALT-10
Rate Capacity 150(kg) 100 kg
Lift Height: 730mm 730 mm
Min. Height 210/330mm 210 mm
Table Dimensions: 700×450×35mm 700×450×35mm
Packing Dimensions : 800×470×260/340mm 800×470×260mm
Net Weight: 37kg 25
3. Installation
I. Put the handle (6) on the frame (14) , and fix it by two M 10 bolt .
II. Insert the foot pedal (48) into the hole of the foot pedal support (44) , and fix it by M8 bolt.
III. Install the straight rod (11) into the gimbal cover and fix it with M5 set screw.
4. Using
I. Trail the cart before using . Foot he foot rod equably to lift the table to the max height till the set site valve
discharge .
II. Fix the cart by brake before loading .
III. Foot the pedal up and down equably to lift the table to the need height , and then load and discharge in the
rate capacity .
IV. Foot the discharge switch to low down the table .
5. Warning!
Ⅰ
Read and understand the owner’s manual before assembly and operation.
Ⅱ
Do not load scissor lift beyond its rated capacity
Ⅲ Keep feet and hand away from under the lowering table. Suggest to wear safety shoes during
operation.
Ⅳ
Do not allow people to sit or ride on scissor lift.
Ⅴ
The goods must put in the area more than 80% area of the table.
Ⅵ
Do not use the cart on slope.
Ⅶ
Do not transport loads in the raised position.
Ⅷ
Failure to comply with the above warnings may result in personal injury and/or property damage.