8
4 Assembly of Appliance
1. Inner Flue
2. Outer Flue
3. 2x M5x35 Screw
4. Product Hanging Plate
5. Front Panel
Figure 4 :
Installation Diagram and Components
6. 2x 3.9x22 Screw
7. Flue Connection Plate
8. 2x Ø6mm Plastic Dowel
9. 3x 5.5x60 Wall Mount Screw
10. 3x Ø10mm Plastic Dowel
•
Affix the assembly pattern on the wall,
at the specified height (See the minimum
and maximum distances intended for the
worktop, in the assembly pattern). Perforate
points A, B and C (Figure 4).
•
Insert Ø10mm dowels into the holes
drilled as A, B, C, and screw down the
screws at the points A + B so that 5mm
space remains between the screw head
and the wall (Figure 4).
•
Affix the hanging plate of the cooker hood
on the body of the cooker hood with 3 x
M5x35 screws (Figure 4 / 4).
•
Hang it on the wall with the hanging plate
of the cooker hood. If the cooker hood is not
parallel, loosen or tighten M5x35 screws to
make the cooker hood parallel.
•
Tighten A + B (5) fixing screw on the wall,
and completely secure the product from its
point C.
