VESTEL 55UA8300, Руководство по эксплуатации

Страница: 83 / 110

English - 81 -
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00
o’clock if Automatic scanning option in the
Upgrade options menu is set to Enabled
and if the TV is connected to an aerial signal
or to Internet. If a new software is found and
downloaded successfully, it will be installed at
the next power on.
NOTE:
Do not unplug the power cord while
led is blinking during the reboot process. If
the TV fails to come on after the upgrade,
unplug, wait for two minutes then plug it
back in.
J
J
Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected
to an active broadband connection.
• Ensure that Nero Media Home software
is installed to your PC (for Audio Video
Sharing function). See “ Nero Media Home
Installation ” section.
• Connect your PC to your modem/router.
This can be a wired or wireless connection.
• Connect your TV to your modem/router
via an ethernet cable. There is a LAN port
at the rear (back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
• To access and play shared files, you must
select the Media Browser . Press the Menu
button and select Media Browser . Press
OK to continue. Select the desired file type
and press OK . You must always use the
Media Browser screen to access and play
shared network files.
• PC/HDD/Media Player or any other
devices that are compatible should be used
with a wired connection for higher playback
quality.
To configure wired settings please refer to
the Network/Internet Settings section in
the System>Settings Menu.
• You might be able to connect your TV to
your LAN depending on your network’s
configuration. In such a case, use an ethernet
cable to connect your TV directly to the
network wall outlet.
LAN input on the rear
side of the TV
network
wall socket
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired
Device, Wireless Device or Disabled , in
accordance with the active connection to the
TV set. Select this as Wired Device if you are
connecting via an ethernet.
Internet Speed Test
Highlight Internet Speed Test and press
the OK button. TV will check the internet
connection bandwidth and display the
result when complete.