VESTEL 55UA8300, Руководство по эксплуатации

Страница: 79 / 110

English - 77 -
Virtual Remote Enable or disable the virtual remote feature.
CEC
With this setting you can enable and disable CEC functionality completely. Press
Left or Right button to enable or disable the feature.
CEC Auto Power
On
This function allows the connected HDMI-CEC compatible device to turn on the
TV and switch to its input source automatically. Press Left or Right button to enable
or disable the feature.
Speakers
To hear the TV audio from the connected compatible audio device set as Amplifier .
You can use the remote control of the TV to control the volume of the audio device.
Smart Remote
Press OK to open the Smart Remote menu screen. Using this screen you can discover
and connect the remote controller devices to your TV wirelessly.
Quickstandby
If this feature is enabled the TV can be turned on again through the virtual remote in
the Smart Center application if it is turned off through it. Press Left or Right button
to enable or disable the feature.
Installation Menu Contents
TKGS
Installation
Displays TKGS Installation menu options. This option may not be available according to
the selected Satellite Operator in the First Time Installation . If not, re-do the First Time
Installation and select the Satellite Operator as TKGS .
Automatic
channel scan
(Retune)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB
stations. Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and
stores analogue stations. Satellite: Searches and stores satellite stations.
Manual
channel scan
This feature can be used for direct broadcast entry.
Network
channel scan
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for
aerial network channels. Digital Cable: Searches for cable network channels.
Analogue fine
tune
You can use this setting for fine tuning analogue channels. This feature is not available if
no analogue channels are stored.
Satellite
Settings
Displays satellite settings. Satellite list: Displays available satellites. You can Add , Delete
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
anntenna settings and/or start a satellite scan. SatcoDX: You can upload or download
SatcoDX data using the related options.
Installation
Settings
Displays installation settings menu. Standby Search (Optional): Your TV will search for new
or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service
List
Use this setting to clear channels stored. This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
First time
installation
Deletes all stored channels and settings, resets TV to factory settings. You will be asked
to enter a PIN number to start with the First Time Installation if you performed Digiturk
installation previously.
NOTE: Default PIN can be set to 0000 or 1234. If you have defined the PIN(is requested
depending on the country selection) during the First Time Installation use the PIN that you
have defined.