VESTEL 43FB8500, Руководство по эксплуатации

Страница: 89 / 130

English - 88 -
TV Menu Contents
System - Picture Menu Contents
3D Settings Press to view 3D settings.
Mode
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema , Game , Sports , Dynamic and
Natural .
Pixellence Mode: While Mode option is highlighted, Pixellence mode will be displayed
bottom of the menu screen. Pixellence Mode function optimizes the TV’s video
settings and helps to acquire a better image quality. Press OK to start Pixellence Mode
to experience Pixellence quality. Press OK button to cancel (except Game Mode).
Not: Pixellence mode will not be available in 3D mode.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to Custom , Minimum , Medium , Maximum , Auto ,
Screen Off or Off .
NOTE: Available options may differ depending on the selected Mode.
Backlight
This setting controls the backlight level. The backlight function will be inactive if
the Energy Saving is set to an option other then Custom .
Advanced Settings
Dynamic Contrast You can change the dynamic contrast ratio to desired value.
Noise Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction setting to
reduce the amount of noise.
Colour Temp
Sets the desired colour temperature value. Cool , Normal , Warm and Custom
options are available.
White Point
If the Colour Temp option is set as Custom , this setting will be available. Increase
the ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.
Picture Zoom Sets the desired image size format.
Film Mode
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
HDMI Full Range
While watching from a HDMI source, this feature will be visible. You can use this
feature to enhance blackness in the picture.
PC Position
Appears only when the input source is set to VGA/PC.
Autoposition Automatically optimizes the display. Press OK to optimize.
H Position
This item shifts the image horizontally to the right hand side or left hand side of the
screen.
V Position This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in
dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase
Depending on the input source(computer etc.) you may see a hazy or noisy
picture on the screen. You can use phase to get a clearer picture by trial and error.