VESTEL 43FB8500, Руководство по эксплуатации

Страница: 83 / 130

English - 82 -
Connections
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
YPbPr/PC Audio Cable (not
supplied)
HDMI
Connection
(back)
S/PDIF
(Optical Out)
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
AV Cable (not supplied)
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
NOTE: When connecting
device via the YPbPr or Side AV
input, you must use the connection
cables to enable connection.
For Side AV input you should
use the supplied cable. See the
illustrations on the left side. | You
can use YPbPr to VGA cable (not
supplied) to enable YPbPr signal
via VGA input. | You cannot use
VGA and YPbPr at the same
time. | To enable PC/ YPbPr
audio, you will need to use the
Side AV input with a YPbPr/
PC audio cable (not supplied)
for audio connection, using the
supplied Side AV connection
cable’s RED and WHITE inputs. |
If an external device is connected
via the SCART socket, the TV will
automatically switch to AV mode.|
When receiving DTV channels
(Mpeg4 H.264) or while in Media
Browser mode, output will not
be available via the scart socket.
| When using the wall mounting
kit (available from third party
in the market, if not supplied),
we recommend that you plug
all your cables into the back of
the TV before mounting on the
wall. | Insert or remove the CI
module only when the TV is
SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
| Obtain the Conditional Access
Module (CAM) and the viewing
card by subscribing to Digiturk. |
The/Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. | By connecting
an HDMI cable to your TV, you
have to use only a shielded HDMI
cable to guarantee a sufficient
i m m u n i t y a g a i n s t p a ra s i t i c
frequency radiation.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection.
After the connection is done, you can turn on the units and use them.
SIDE AV