VESTEL 43FB8500, Руководство по эксплуатации

Страница: 78 / 130

English - 77 -
ĐƋ 3D Glasses x 4
ĐƋ
Dual Play Glasses x2
Standby Notifications
If the TV does not receive any input signal
(e.g. from an
aerial or HDMI source) for 5
minutes, it will go into standby. When you
next switch-on, the following message will be
displayed:
“ TV switched to stand-by mode
automatically because there was no signal
for a long time.
” Press OK to continue.
If the TV is on and it isn’t being operated
for a while it will go into standby. When you
next switch-on, the following message will be
displayed.
“ TV switched to stand-by mode
automatically because no operation was
made for a long time.
” Press OK to continue.
TV Control Switch
& Operation
1. Standby/On button
2. Source button
3. Pro/- buttons
4. /- buttons
Press the /- buttons simultaneously
to view main menu and use Pro/-
buttons to navigate and /- buttons
to change value.
Note: The position of the control buttons may
differ depending on the model.
Operation with the Remote Control
Press the Menu button on your remote
control to display main menu screen. Use the
directional buttons to select a menu tab and
press
OK to enter. Use the directional buttons
again to select or set an item. Press Return/
Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources. Press the
Source button on your
remote control consecutively to select the
different sources.
Changing Channels and Volume
You can change the channel and adjust
the volume by using the
/- and
Programme +/- buttons on the remote.
Operation with the Remote Control
Press the Menu button on your remote
control to display main menu screen. Use the
directional buttons to select a menu tab and
press
OK to enter. Use the directional buttons
again to select or set an item. Press Return/
Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources. Press the
Source button on your
remote control consecutively to select the
different sources.
Changing Channels and Volume
You can change the channel and adjust
the volume by using the
/- and
Programme +/- buttons on the remote.
Inserting the Batteries
into the Remote
Lift the cover on the back of the remote
gently. Insert two
AAA batteries. Make sure
the (+) and (-) signs match (observe correct
polarity). Place the cover back on.