English - 79 -
Wireless Connectivity
(optional)
To Connect to a Wireless Network
The TV cannot connect to the networks with
a hidden SSID. To make your modem’s SSID
visible, you should change your SSID settings
via the modem’s software.
To Connect to a wireless LAN, you should
perform the following steps:
1.
Then connect the wireless adaptor to one
of the USB inputs of the TV.
2.
To configure your wireless settings please
refer to the
Network/Internet Settings
section in the
System>Settings
Menu
.
Broadband ISP
connection
Wireless LAN
adaptor
USB inputs on the rear left
side of the TV
A Wireless-N router (IEEE 802.11a/b/g/n)
with simultaneous 2.4 and 5 GHz bands is
designed to increase bandwidth. These are
optimized for smoother and faster HD video
streaming, file transfers and wireless gaming.
•
The frequency and channel differ depending
on the area.
•
The transmission speed differs depending
on the distance and number of obstructions
between the transmission products, the
configuration of these products, the radio
wave conditions, the line traffic and the
products that you use. The transmission
may also be cut off or may get disconnected
depending on the radio wave conditions,
DECT phones or any other WiFi 11b
appliances. The standard values of the
transmission speed are the theoretical
maximum values for the wireless standards.
They are not the actual speeds of data
transmission.
•
The location where the transmission is most
effective differs depending on the usage
environment.
•
The Wireless LAN adaptor should be
connected directly to the TV’s USB port.
USB hubs are not supported. You can plug
your wifi dongle into a extension dock in
cases where network quality is poor and the
wifi dongle needs to be placed to a location
with better signal quality.
•
The Wireless LAN adaptor supports
802.11 a,b,g & n type modems. It is highly
recommended that you should use the IEEE
802.11n communication protocol in order to
avoid any possible problems while watching
videos.
•
Use the other USB input, if you experience
problems with audio/video performance.
•
You must change your modem’s SSID when
there are any other modems around with the
same SSID. You can encounter connection
problems otherwise. Use a wired connection
if you experience problems with a wireless
connection.
Configuring Wireless Device Settings
To enable Wi-Fi features, plug in the Wi-Fi
dongle to one of the USB ports. Open the
Network/Internet Settings
menu and select
Network Type
as
Wireless Device
to start
connection process.
The TV will scan the wireless networks
automatically. A list of available networks will
be displayed. Please select your desired network
from the list.
