English - 66 -
menu will be displayed where you can select
to install
D-Smar
t channels. Set the
Install
Type
as
Operator
and than set the
Satellite
Operator
accordingly.
If you select
DSmart
operator, next menu
item will be
Apartment Installation
. If you
are using an individual D-Smart account, you
should skip this step by setting as
No
. If an
apartment installation system is available in
your apartment, select
Yes
and press
OK
to
proceed. Shifting is processed in accordance
with the IF frequency values.
You can also
select one of the
Manual channel scan
or
Automatic channel scan
procedures by
using the
Preferred Scan
option.
If you select
Standard
as
Install Type
and
press
OK
,
Antenna Type
menu will be
displayed first. You can select
Antenna Type
as
Direct
,
Single Satellite Cable
or
DiSEqC
switch
by using “ ” or “ ” buttons.
•
Direct:
If you have a single receiver and a
direct satellite dish, select this antenna type.
Press
OK
to continue. Select an available
satellite on the next screen and press
OK
to scan for services.
•
Single Satellite Cable:
If you have multiple
receivers and a single satellite cable system,
select this antenna type. Press
OK
to
continue. Configure settings by following
instructions on the next screen. Press
OK
to scan for services.
•
DiSEqC switch:
If you have multiple satellite
dishes and a
DiSEqC switch
, select this
antenna type. Press
OK
to continue. You
can set four
DiSEqC
options (if available)
on the next screen. Press
OK
button to scan
the first satellite in the list.
TKGS (Türksat Kanal Güncelleme
Sistemi) installation
If desired, you can start a
TKGS Installation
if the
Satellite
broadcast search option is
turned on. Before the satellite search starts, a
menu will be displayed where you can select
to start a
TKGS Installation
. Set the
Install
Type
as
Operator
and than set the
Satellite
Operator
as
TKGS
. Then press the
OK
button to start
TKGS Installation
. Set your
antenna type as described abow. You can
select to install
HD
or
SD
channels during the
installation. This selection can be done later
too using the
Preferred
List
option under the
Installation>TKGS Installation
menu. The
selection will be activated, after switching the
TV off and back on again or after a manual
update as described below.
If wanted
TKGS Installation
can be applied
manually after the
First Time Installation
.
Press the
Menu
button. Highlight
Installation
and press
OK
. In the sub menu highlight
Satellite
Settings
and press
OK
. Then select
Antenna
Installation
. After the antenna type
is selected and other satellite settings are
made press the
RED
button to start a
TKGS
Installation
.
The second way to apply
TKGS installation
manually after the
First Time Installation
is starting an update. To do this press the
Menu
button and select
Installation
>
TKGS
Installation
>
Start
Update
.
But to be able
to do so the
Satellite Settings
should be
done first.
To use the update options of TKGS
TKGS feature keeps your satellite channel lists
up-to-date in three different ways.
Standby:
While going into standby mode, the
TV controls the TKGS table version number
whether it is the last version or not. If any
changes are detected, TV starts to update. On
the next switch-on a message will be displayed
to inform the user about the changes.
Background:
When a channel is opened
which isn’t defined in the TKGS channel
