Vestax PMC 500, Руководство пользователя

Страница: 8 / 16

8
#1
METER ASSIGN SWITCH
Use this switch to select either MASTER OUT 1 or
2 to be shown in the MASTER LEVEL METER
#0
.
#2
POWER LED
This LED will be illuminated when the POWER
SWITCH
%4
is on.
#3
AUX SEND LEVEL
Adjusts the output level sent to an external effects unit
connected to the AUX SEND JACK
$9
on the rear
panel. When the crossfader is used, this signal is taken
after the crossfader but before the master fader. This
makes a variety of techniques possible, such as the
application of echo to a cut out in which the crossfader
would be used.
#4
AUX RCV LEVEL
Adjusts the input level from an external effect unit
connected to the AUX RCV JACK
%
0
on the rear
panel.
#5
AUX CUE ON/OFF SWITCH
Sends the signal of external effects unit connected to
the AUX SEND JACK to the MONITOR section for
headphone monitoring.
#6
AUX CUE LED
This LED will be illuminated when the AUX CUE
SWITCH
#5
is on.
#7
AUX RCV LEVEL METER
This LED bar level meter indicates the level of the
AUX RCV JACK signal.
#8
BOOTH OUT EQ (HI/LOW)
Adjusts the HI and LOW frequencies for the
BOOTH OUT.
#9
BOOTH OUT LEVEL
Adjusts the output level of BOOTH OUT.
$0
MUTE SWITCH
This switch mutes the signal being sent to BOOTH
OUT.
$1
MUTE LED
This LED will be illuminated when the MUTE
SWITCH
$
0
is on.
$2
MASTER 1&2 & BOOTH OUTPUT LEVEL
SELECTOR (ATTENUATION).
Located under the top panel, this switch adjusts the
output level for Master 1&2 in addition to the Booth out
put level. The PMC-500 is pre-set to a 0dB output
level but may be changed to -10dB.
MASTER SECTION
@6
MASTER BALANCE 1&2
Adjusts the signal balance of the L to R side of the
outputs from MASTER OUT 1&2 JACKS
%2
on the
rear panel.
@7
MASTER LEVEL 1&2
Adjusts the signal level outputs from MASTER OUT
1&2 JACKS on the rear panel.
@8
MASTER 1&2 CUE SWITCH
Used to send the signal from the MASTER OUT
1&2 to the monitor section for headphone
monitoring.
@9
MASTER 1&2 CUE LED
This LED is illuminated when the MASTER 1&2
CUE SWITCH
@8
is on.
#0
MASTER LEVEL METER
This LED bar level meter indicates the L and R
outputs.