20
NOTE
2. When track memory number is shown in the LCD,
pressing the ENTER key recalls the track from the track
memory number.
3-8. Fader Start
Connect the FADER START jack on the rear panel of the main unit and fader start jack on the external device which
supports the fader start function (i.e.X-9, X-17, X-15, XS-3, etc...) with Fader Start Cable which is supplied to perform
the fader start/back cue performance with the external device. Audio signal should be connected to the external
device as well.
Setting
1. The connection cable of TT-M1 is connected to the
TT-LINK terminal of this unit, and TT-M1 is turned
on.
2. The PLAY key is pushed, pushing the SHIFT key
and adjustment with this unit is performed.
3-10. Programmed Play
The CDX-05 features up to 30 tracks of program play
function. Program itself is maintained even if power is
turned off, and if CD is not ejected, program list will be
backed up.
Create the program
Cue and loop points can be memorized and/or recalled. However, just after the recall operation, seamless start
from the cue or loop points canﾕt be performed because there are no data in the RAM buffer just after the recall
operation. Once playing from cue points (CUE 1-3)
and/or loop start point for a few second, flash start and/or seamless looping can be performed.
TIME
/ ENTER
(SHIFT)
NOTE
In case you use TT-M1, please do not carry out use,
without surely adjusting. If it is used without
adjusting, there is a possibility that it may not work
normally.
●If the disc is ejected, program will be erased.
●Once one of the CUE 1-3 key is pressed,
programmed play will be cancelled.
TIME
/ ENTER
(SHIFT)
TIME
/ ENTER
(SHIFT)
(PGM EDIT)
PLAY MODE
NOTE
3-9. TT-M1（TASCAM） Play
By connecting with TT-M1 (TASCAM) set to the analog turntable, this unit can be operated on an analog turntable
insteadof a JOG wheel.
1. Enter the program edit mode by pressing and holding
the SHIFT key and press the PLAY MODE/PGM EDIT
key.
NOTE
Please turn off the scratch mode of the CDX-05 when using the
TT-M1 The machine might not function stabley if it is turned on.
All manuals and user guides at all-guides.com
