12
2-4. A-B Looping
To store the LOOP points
1. Press the LOOP START key when playing or pausing.
The LOOP START key will light and the LOOP END
key will start flashing.
2. Press the LOOP END key when playing or pausing.
LOOP START and LOOP END keys will light. If the
loop end point is set when the unit is playing, the CDX-
05 starts loop playback seamlessly. If the loop end
point is set when the unit is paused, the CDX-05 goes
to the loop start point then pauses.
Disengage loop play
When loop play is engaged, pressing the RE-
LOOP/EXIT key disengages loop play. In this case, the
unit continues playback and RELOOP/EXIT key light
goes off, but the loop points are not erased.
When loop play is engaged, locating to the out point of
a loop section disengages loop play (i.e. pressing the
CUE key, etc...). The LOOP key goes off, but the loop
points are not erased.
LOOP
START
LOOP
LOOP
END
LOOP
RELOOP
/EXIT
LOOP
(TRK MEMO)
CUE-SET
/ INS
NOTE
CUE
1
CUE
3
CUE
2
2-3. CUE-PLAY
The CDX-05 has a flash start function that can be used
with the CUE 1-3 keys. When the flash start function is
activated (when the CUE-PLY indicator in the LCD
lights), pressing the CUE 1-3 key enables flash start.
When the CUE-PLY indicator in the LCD doesnﾕt light, the unit is back in cue mode. In this mode, pressing the
CUE 1-3 key locates the stored cue point then the unit pauses.
NOTE
RELOOP
/EXIT
LOOP
END
RELOOP
/EXIT
LOOP
START
LOOP
START
LOOP
END
●When you register loop point, please check that it is not under loop reproduction now. A setup of a loop point
cannot be performed during loop reproduction.
●Loop point elimination cannot be performed. A loop point can always be overwritten.
●Please register a loop point in the same track. It does not correspond to loop reproduction over a track.
●A LOOP END point can be set only to back from a LOOP START point.
●Reverse reproduction of a loop cannot be performed.
●Both loop start and end points can set to within a track.
All manuals and user guides at all-guides.com
