Vestamatic Rolltec Pico, Инструкция по установке и эксплуатации

Страница: 19 / 22

Notes for professional electricians Installation
Important: Parallel control of several roller shutter drive motors can
only be implemented by means of isolating relays or
group control devices.
For trouble-free operation of all storing functions, it is
necessary that the
Vestamatic Rolltec Pico roller shutter
control is connected to the line voltage for approx. 1 hour.
The following versions of cover frame Jung “CD 500”, alpine-white,
are available:
Combination frame one-fold, article-no. 01400201
Combination frame two-fold, article-no. 01400202
Combination frame three-fold, article-no. 01400203
Combination frame four-fold, article-no. 01400204
Combination frame five-fold, article-no. 01400205
For surface-type installation
please use our surface-type housing,
article-no. 01030753
For controlling two drives, we recommend our isolating relays:
Isolating relays TR N2S,
article-no. 01054220
Isolating relays TR N2A, article-no. 01054120.
- 35 -
G
Installation Installation instructions / Technical data
Installation instructions
Technical data
Power supply: 230 V W , 50 Hz
Rated power: 2 W
Output: 230 V W
Maximum load: 3 A, 230 V W , cos f > 0.8
Switching time: 120 seconds
Operating temperature: 0 °C (32 °F) to +40 °C (104 °F)
IP class:
IP 40
All technical data is subject to change!
- 36 -
G
83100411.qxd 18.09.01 11:12 Seite 37