Vestamatic Rolltec Pico, Инструкция по установке и эксплуатации

Страница: 18 / 22

Random generator Programming
The random generator generates the so-called random time which
causes the roller shutters to move up or down with a deviation of
+/-15 minutes to the previously programmed times(*).
The “randomly” moving up and down roller shutters give the impres-
sion of an inhabited house and thus provide additional protection in
case the house owner is absent for an extended period of time.
Simply press the random button (Z) to activate the random generator.
The display will now indicate
a (Z) in the upper right hand
corner.
(0ß8:0ß0Z
Press the random button (Z) again to deactivate the random genera-
tor. The random generator is now turned off, the (Z) in the display will
disappear and the roller shutter will move up and down accurately at
the times you have previously programmed.
- 33 -
G
Installation Notes for professional electricians
Installation and basic settings:
1. Switch off the power supply.
2. Connect the supporting frame terminal according to the wiring dia-
gram (see page 37).
Attention: Currently valid VDE standards must be observed
when connecting the device, in particular DIN VDE
0100/0700 as well as the currently valid regulations
of your local power company and accident preven-
tion regulations.
3. Mount the supporting frame in the flush-type box.
4. Slide the combination frame carefully in the supporting frame so that
the centring pins of the supporting frame fix the frame in the centre.
5. Slide the basic housing in the supporting frame.
6. Switch on the power supply and press the reset button.
7. Check, if the direction of the motor rotation corresponds with the
direction buttons. If not, exchange terminal 4 with terminal 5.
- 34 -
G
83100411.qxd 18.09.01 11:12 Seite 35