4
Mounting Methods for the Magnet
Screw Mounting
The back cover of the magnet has two Mounting Holes for mounting purpose.
To mount the Magnet:
I. Open the back cover by using a flat-headed screwdriver to fit into the caved in area and push upwards.
II. Using the holes as a template, drill both holes.
III. Screw the back cover into the door/window using a Philips screwdriver. Where required, use the Magnet
Spacer to better align the magnet to the rib marks.
IV. Attach the front cover to the back cover. You will hear a Click sound when the front cover is stabilized onto the
back cover,.
Adhesive Mounting
The Magnet can also be mounted using the double-sided adhesive tape pad or the double-sided adhesive Magnet
Spacer.
I. Clean the mounting location and back of the Magnet with a suitable degreaser.
II. Remove the protective covering from one side of the double-sided adhesive pad or the double-sided adhesive
Magnet Spacer. Apply to the back of the Magnet and press firmly for 30 seconds to ensure good contact.
III. Remove the other cover and firmly press the Magnet onto the desired location for 30 seconds..
<NOTE>
Please do not re-apply the double-sided adhesive tape pad or the double-sided adhesive Magnet Spacer.
They cannot be reused
