3
(Pic 7.)
Installation
Mounting Methods
Mount the Door Contact on the fixed frame of door/window using
Velcro tape Mounting
or
Screw Mounting.
Mount the magnet on the mobile object (door/window) using
Screw Mounting
or
Adhesive Mounting
.
Align the magnet according the rib mark on Door Contact. Where required, use the Magnet Spacer to better align
the magnet to the rib marks.
< NOTE >
The magnet should be no more than
15mm
from the detector when the door is closed.
Mounting Methods for the Door Contact
Screw Mounting
The back cover has two Mounting Holes (knockouts), where the plastic is thinner, for
mounting purpose.
To mount the Door Contact:
I.
Remove the cover.
II. Break through the knockout on the back cover.
III. Using the holes as a template, drill both holes.
IV. Insert wall plugs if fixing into plaster or brick.
V. Screw the back cover into the wall plug using a Philips screwdriver.
VI. Attach the front cover to the back cover.
Velcro tape Mounting:
The Door Contact can be wall mounted using Velcro tape provided.
I.
Clean the wall mounting location and back of the Door Contact with
degreaser. Do not mount on wall with cracking paint or rough surface.
II.
The Velcro tape can be separated to Hook and Loop side.
(
Pic 7
)
III.
Remove the protective cover of the Hook side and attach to the back of the
Door Contact. Press firmly for 30 seconds to ensure good contact. (
Pic 8.
)
IV. Remove the protective cover of the Loop side and apply to desired
mounting location as in (
Pic 9.
) Press firmly for 30 seconds to ensure good
contact.
V.
Apply the Door Contact on the Loop side Velcro taped on the wall (
Pic 10 & 11.
)
(Pic 8.) (Pic 9.) (Pic 10.) (Pic 11.)
Hooks
Loops
