７
■Operation
CAUTIONS
IN OPERATION
PROHIBITED
Do not use the N-3 for anything other than static erasure or dust removal.
REMEMBER
If you notice any abnormalities, stop using the N-3 immediately.
REMEMBER
Supply clean dry air. Improper air quality can lead to the N-3 deterioration
and contamination of the object.
PROHIBITED
Do not remodel or disassemble the N-3 as the unit contains high voltage
parts.
PROHIBITED
Do not drop the N-3 or subject it to any shock / vibration.
PROHIBITED
Do not pull the tube forcibly. Inappropriate handling can damage the N-3 and
internally disconnect the power cable and air hose.
PROHIBITED
Do not damage the hose or wiring.
Keep the hose and wiring away from any heat source.
PROHIBITED
Do not use the N-3 if it has a defect.
Instructions for wiring
Power Source
1) Connect the DC24V power to No.6
connection pin of the power harness, and
the grounding wire to the No.5 connection
pin.(Please refer to the illustration at the
right)
* Connection pins No.2 and No.1 are
connected in parallel with No.6 and No.5
respectively.
For the multiple connection of this unit,
power supply to next unit can be done by
No.2 pin for DC24V and No.1 pin for the grounding.
(Please refer to the illustration at the right)
2) Make sure to ground the unit by the appropriate wiring.
3) Supply 24V DC power.
* N-3 does not have a power switch.
Switching on/off should be done by external equipment.
* Supplied 24V DC power should be stable within 60m
seconds. Otherwise, high voltage alarm will be activated
and the unit will shut off.
* It can supply a power up to 11 by wiring.
