Vessel Stat Clean CF300-E Скачать руководство пользователя

Страница: 10 / 16

2 6

■

Operation

1. CONNECTING THE AC ADAPTER

Power can be externally supplied to the unit without using

the provided AC adapter.

Carry out wiring with a Molex connector as shown in the figure.

Be sure to connect the ground connector. Otherwise, connect the

ground terminal, which is located on the back side of the body, to

the ground with a wire.

When stopping the unit, shut off the external power supply.

2. TURNING ON THE UNIT

Turn the power switch

(POWER) to the [I] position.

The power light illuminates and

the operation will start.

3. TURNING OFF THE UNIT

Turn the power switch (POWER) to the [O] position. The power light goes off and the operation will

stop.

4. AIRFLOW ADJUSTMENT

The airflow can be adjusted continuously by turning the airflow adjustment (FAN SPEED) rotary control

using a thin flat-tip screwdriver.

Содержание Stat Clean CF300-E

















Результаты поиска

Содержание Stat Clean CF300-E

Отзывы:

Похожие инструкции для Stat Clean CF300-E

Бренды по названию

Популярные бренды

Vessel Stat Clean CF300-E, Инструкция по эксплуатации

Результаты поиска

Содержание Stat Clean CF300-E

Отзывы:

Похожие инструкции для Stat Clean CF300-E

Бренды по названию

Популярные бренды