Vessel HPG-1, Инструкция по эксплуатации, Страница: 4 / 12

4
■
Main Specifications
Main Specifications
Model : HPG-1
Type : High voltage applied type ionizing gun
Structure
: Direct coupled (Touch the electrode when applying current may bring
electric shocks.)
Applied high voltage : High voltage power supply unit GP-1
*1
Ionizing method : Alternating current corona discharge method
Applied voltage &
Frequency
: 3.5 kVAC and 50 to 60 Hz (set/adjusted on the GP-1 side).
Operating fluid &
Input pressure
: Clean air with maximum input pressure of 0.7 MPa (PROHIBITED TO SUPPLY
AIR AT MORE THAN 0.7MPa. SERIOUS RISK OF DAMAGE OR BREAKAGE ON
THE BODY AND OTHER PARTS.)
Operating temperature
& humidity
: 0 to 45°C and 10 to 90% RH (without freezing or dew condensation)
Storage temperature &
humidity
: -30 to 50°C and 10 to 90% RH (without freezing or dew condensation)
Installation distance
: Approx. 50 to 300 mm (the distance between a charged object and the
discharge tip of the gun)
Decay time : Approx. 0.5 sec. (Input air pressure = 0.3 MPa, Distance = 150 mm)
Ion balance
: Adjustable on the GP-1 4kV (A charged plate monitor or equivalent is
required).
Installation place : Indoors
Protection circuit
: High Voltage Power Supply GP-1 is equipped with a high voltage anomaly
detection function and automatic stop circuit.
High voltage cable : Standard accessory 3m cable
*2
(silicone shielded cable)
Termination connector : High Voltage Connector CON-4
Air connection : For 8mm (O.D.) tube, one-touch joint (when a single product is used)
Material
: Die-cast aluminum (gun body), PA66 (nozzle body),
SUS304 (head nozzle), and titanium (discharge needle)
Size : See the external dimension diagram (on the next page).
Weight
: Approx. 560 g (including a 3m high voltage cable and a high voltage
connector)
Noise : Approx. 95 dBA (input air pressure = 0.3 MPa)
Air consumption : Approx. 100L/min. (input air pressure = 0.3 MPa)
Life expectancy
: 10,000 hours (8 hours x 250 days x 5 years) (only as a guide)
* This is not a period of guarantee.
*1 Use the power supply with the red "OUTPUT 4 kV" sticker.
*2 The cable length can be changed to up to 5m as an option.