Vessel HPG-1, Инструкция по эксплуатации, Страница: 3 / 12

3
■
Product Overview
Product Overview
High Power Gun HPG-1 is a static eliminator which is designed to eliminate static charges and dusts
from a charged object by ionizing compressed air, which is supplied from a compressor, by the
discharge electrode equipped inside the gun, and blowing it to the object.
The HPG-1 should be used together with its dedicated high voltage power supply GP-1 which is also
available from us. High voltage of 3.5 kVAC is used for this product HPG-1. Therefore, it is necessary
to adjust the output voltage of High Voltage Power Supply GP-1 to be 3.5 kV (For details, refer to the
GP-1 instruction manual).
The dedicated AC adapter AD24-GP or AD24-GPE for the High Voltage Power Supply GP-1 supports
a wide range of input voltage (single phase 100 to 240 VAC, and 50 to 60 Hz). If using DC power
supply for machinery, equipment, etc., connect a 24VDC ± 10% 1A power supply. In this case,
connect the 0V side to ground.
Product Features
●
Titanium discharge needle (discharge electrode)
For the discharge electrode of the product, titanium, which has resistance against wear damage, is
used so that stable performance can be kept for a long time. By using clean dry air, static
eliminating performance improves, and the frequency of cleaning the electrode can be reduced.
●
Silicone-shield high-voltage cable
* A silicone cable with great durability is used as the high voltage cable of the product. This cable
is also shielded, so it reduces the negative influences by the high voltage electric field
(in consideration of EMC) and simplifies the wiring.
* Urethane, cleaning-easy material, is used for cable exterior.
* The cable length can be changed to up to 5m as an option.
* Non-shielded type is also available as option. Please contact us for more detail.
●
Strong die-cast aluminum gun body
The gun body is made of light and durable aluminum die-cast.
●
Two-way type air gun with a large lever
An air tube can be connected to the top or the bottom of the product. Although a one-touch joint
for 8 mm (outside diameter) air tube is attached at the time of shipping, it can be replaced with a
coupler joint (standard accessory). Also, a large, easy-to-pull lever is equipped for better
workability.
●
Ion balance adjustment circuit
High Voltage Power Supply GP-1 for this product is equipped with a circuit for ion balance
adjustment. According to your environment and/or conditions, the ion balance can be easily
adjusted through external operation of the adjustment portion. High Voltage Power Supply GP-1
has two output terminals and can connect up to two guns. However, in that case, it is not possible
to adjust the ion balance of each of them. Therefore, when the ion balance is an important factor,
it is recommended to use just a single gun so that you can adjust the ion balance.
●
Safety/Anomaly Detection Circuit
High Voltage Power Supply GP-1 is equipped with a safety circuit which automatically shuts off the
output when a high voltage short circuit is detected. Also, it has an alarm output terminal.