Vessel GT-S600C, Инструкция по эксплуатации

Страница: 12 / 40

How to use the tool
11
If it is not securely attached, the socket or bit may detach and fly off.
Do not attach the socket or bit when the tool is idling.
About handling
* Do not touch any rotating parts. It is very dangerous and could lead to
injury.
* Do not idle the tool without load.
* Confirm the rotation direction before starting the unit.
* Be sure to turn off the air, when work is finished as well as when
bits/sockets and the parts are to be changed.
* Do not direct the exhaust towards people or fire. The exhaust is
dangerous since it contains oil.
* Do not touch the tip tool and screws immediately after the work because
they became hot from friction during work.
* When you notice any abnormalities, stop working and turn off the air
supply.
Maintenance / Repairs
・ We recommend periodic inspections for safe, worry-free use. If
inspections are neglected, it may affect the performance, lifespan and
safety of the product.
・
Inspection (maintenance) should be conducted only by those who
carefully read and fully understood the instruction manual for this
product.
・
Contact the local distributor for repairs. Do not repair the unit by yourself.
Points of regular maintenance
When conducting maintenance, be sure to remove the hose coupling and
do not supply any air.
The durability of parts depends on how frequently the unit is used.
Please apply for inspection / repairing in case you notice any abnormality in
impact and revolving sounds. (eg. in case of any abnormalities in the
rhythm of hammering, deterioration in efficiency, and working torque
degradation).