Vessel GT-S600C, Инструкция по эксплуатации

Страница: 11 / 40

How to use the tool
10
How to use the tool
●
Starting and stopping
１． Connecting the air coupling.
２．
Supply air with a compressor.
３． Press the throttle lever to start the unit.
４．
Release the throttle lever to stop the unit.
５．
Rotation speed can be controlled by the
throttle lever.
● Changing the direction of rotation.
When the Reverse Lever is set to "R"
it rotates clockwise.
When it is set to "L," it rotates counter
clockwise.
Do not operate the Reverse Lever while
pressing the throttle lever.
● Adjusting the torque.
Torque can be adjusted by the Adjustment Valve.
"4" is the minimum and "1" is the maximum.
●
Installing sockets and bits.
Air impact wrenches with Pin-lock anvil
(S60CW,S600C) have a hole on the anvil
(Square-head drive).
This is for installing a socket securely on it
with a Pin and an O-ring as in the diagram.
When using Bit Retainer ball type (S6CD),
Bit needs to be inserted to anvil until you hear
clicky sound by locking with ball.
Please check to see if the bit is properly locked
-in by pulling it before operating the unit.