Vessel GT-1600VP, Инструкция по эксплуатации

Страница: 11 / 40

How to use the tool
10
How to use the tool
●
Starting and stopping
１． Connecting the air coupling.
２．
Supply air with a compressor.
３． Press the throttle lever to start the unit.
４．
Release the throttle lever to stop the unit.
● Changing the direction of rotation.
When the switch lever is set to "R"
it rotates clockwise.
When it is set to "L," it rotates counter
clockwise.
Do not operate the switch lever while
pressing the throttle lever.
● Adjusting the torque.
Torque can be adjusted by the Air Regulator.
"1" is the minimum and "4" is the maximum.
●
Installing sockets.
There is a pinhole on the point of the anvil
(Drive part).
Align the pinholes of the socket and anvil
and attach the socket with the pin and O-Ring.
Install as shown in the figure.
If it is not securely attached, the socket or bit may detach and fly off.
Do not attach the socket or bit when the tool is idling.