16
■
Before Use
CAUTIONS
REMEMBER
If noticing anything strange, stop using this product immediately.
PROHIBITED Keep away from sources of heat.
PROHIBITED
Do not test the electrode wires for grounding, short-circuiting or sparking. These
tests can adversely affect ion balance.
1. Daily Checks
Check CF600-E for inspection before use. Refer “Maintenance” pages.
Dust on electrodes
Contamination of the front cover
Dirty filter
Disconnection of the grounding wire
Loose connector
Damaged or loose parts
Adhering condensation or water droplets
Dust on cleaning brush
If damage or trouble is detected, contact the supplier for servicing.
■
Operation
1. TURNING ON THE UNIT
Turn the power switch (POWER) to the [I] position. The power light illuminates, and the operation will
start.
2. TURNING OFF THE UNIT
Turn the power switch (POWER) to the [O] position. The power light goes off and the operation will
stop.
3. AIRFLOW ADJUSTMENT
The airflow can be adjusted continuously by turning the airflow adjustment (FAN SPEED) rotary
control using a thin flat-tip screwdriver.
ALARM LED
1. H.V. ALARM
When the integrated piezoelectric transformer detects overload and shuts down the output, “HV
ALARM” LED on the front face lights up and the operation is stopped. If the alarm lights up,
immediately disconnect the connector to shut off the electric power. If a foreign matter adheres on the
discharge needle, clean the needle and turn on the power again to check that the alarm does not light
on. If the alarm lights up again when turning on the power, always ask the dealer for the inspection
and repair to prevent accidents.
