15
CAUTIONS
REMEMBER
Install CF600-E securely.CF600-E can be damaged or malfunction
dropped.
REMEMBER
Install CF600-E on environments withstanding the product specification
Adverse environments cause product deterioration and breakdown.
REMEMBER
Be sure to connect the grounding wire. A failure may result if this unit is not
properly grounded.
PROHIBITED
Do not useCF600-E base on following environments.
Adverse environments can result in explosion, fire, electric shock and accident.
*Where explosion-proofing is required.
*Where flammable atmospheres found.
*Where temperature and humidity are outside specified ranges
*Where dewing or sharp temperature fluctuations occurs.
*Where there is heavy dust or smoke.
*Where possibly wet by water, oil, chemicals, etc.
*Where strong electric or magnetic fields are generated.
1. Attaching the stand
Attach the angle adjusting knob, stand, rubber washer, and stand to
the body.Assembling order(shown in the figure).
Body
⇒
Rubber washer
⇒
Stand
⇒
Angle adjusting knob
2. Fix the product
When Used on a Desktop
CF600-E can be used on the desktop. Do not locate on unstable tables, etc.
damaged and malfunctioned if it falls.
When Mounted on a Wall or Structure
Select a location and height in consideration of CF600-E's static electricity removal range
information regarding the static electricity removal range, refer to the section
Use the mounting holes in the bottom of the stand to secure it to the structure or cell base
the dimension drawing, refer to the section Exterior view).
The angle can be adjusted using the angle adjusting knob located on the left and right sides of
the stand. Securely tighten these knobs after confirming the angle.
Do not install this unit in dusty, hot or humid places or where possibly wet by water and
Keep objects from getting in-between CF600-E and the target area.
Before installing CF600-E, check the strength of supporting structure.
3. Supply power
Insert the included special AC adapter connector into the jack on the back of
the body.
User-side power supply
Power can be externally supplied to the unit without using the provided AC
adapter. Carry out wiring with a Molex connector as shown in the figure.
Power Supply Adapter
Use the power adapter
（
AD24-IT19E
）
which is specifically designed for use
of CF600-E. The AC adapter plug is a 2-pronged plug. Connect this to a
power outlet that has a ground terminal.
4. Connection of grounding wire
Plug this unit into a power receptacle which has a ground terminal.
Be sure to connect the ground connector. If no such power receptacles are
available, ground the unit with a wire connected to the ground terminal of the
unit.
■
Installation
malfunctioned if it is
withstanding the product specification.
Adverse environments cause product deterioration and breakdown.
A failure may result if this unit is not
Adverse environments can result in explosion, fire, electric shock and accident.
ranges.
CF600-E can be
's static electricity removal range (For
the section Performance).
to secure it to the structure or cell base (For
ing knob located on the left and right sides of
Do not install this unit in dusty, hot or humid places or where possibly wet by water and oil.
