manualshive.com logo in svg

VESPA SPIRIT 150 3V ABS, Руководство пользователя

Поделиться
Скачать
VESPA SPIRIT 150 3V ABS Скачать руководство пользователя страница 68

03_27

03_28

Head light adjustment (03_27, 03_28)

Proceed as follows:

- Position the vehicle in running order and with the tyres inflated to the prescribed
pressure, onto a flat surface, 10 m away from a half-lit white screen; ensure that the
longitudinal axis of the vehicle is perpendicular to the screen;

- Turn on the headlight and check that the borderline of the projected light beam on
the screen is not higher than 9/10 or lower than 7/10 of the distance from the ground
to the centre of the vehicle headlamp;

- If this is not the case, adjust the headlight by operating the screw «

A

».

N.B.

THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-
GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE VE-
HICLE IS USED.

03_29

Front direction indicators (03_29, 03_30, 03_31)

To replace the bulbs:
- Open the front case and remove the rubber cap «

A

».

68

3 Maintenance

Содержание SPIRIT 150 3V ABS







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды