manualshive.com logo in svg

VESPA SPIRIT 150 3V ABS, Руководство пользователя

Поделиться
Скачать
VESPA SPIRIT 150 3V ABS Скачать руководство пользователя страница 59

03_17

Long periods of inactivity (03_17)

Battery performance will decrease if the vehicle is not used for a long time. This is the
result of the natural phenomenon of battery discharging, and may be due to residual
absorption by vehicle components with constant power consumption. Poor battery
performance may also be due to environmental conditions and the cleanness of the
poles. In order to avoid difficult starts and/or irreversible damage to the battery, follow
any of these steps:

- At least once a month

 start the engine and run it slightly above idle speed for 10-15

minutes. This keeps all the engine components, as well as the battery, in good working
order.

- Take your vehicle to a garage (as indicated in the «Vehicle not used for extended
periods» section) to have the battery removed. Have the battery cleaned, charged
fully and stored in a dry, ventilated place. Recharge 

at least once every two

months

.

N.B.

THE BATTERY MUST BE CHARGED WITH A CURRENT EQUAL TO 1/10 OF THE
RATED CAPACITY OF THE BATTERY AND FOR NOT LONGER THAN 10 HOURS.
CONTACT AN AUTHORISED SERVICE CENTRE TO CARRY OUT THIS OPERA-
TION SAFELY. WHEN REFITTING THE BATTERY MAKE SURE THE LEADS ARE
CORRECTLY CONNECTED TO THE TERMINALS.

WARNING

DO NOT DISCONNECT THE BATTERY CABLES WITH THE ENGINE RUNNING,
THIS CAN CAUSE IRREPARABLE DAMAGE TO THE VEHICLE'S ELECTRONIC
CONTROL UNIT.

59

3 Maintenance

Содержание SPIRIT 150 3V ABS







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды