VESPA SPIRIT 150 3V ABS, Руководство пользователя

Страница: 21 / 102

Operation
Every time the ignition key is removed in the " OFF " or " LOCK " position, the safety
system activates the immobilizer system. Turning the key to " ON " disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised (indicated by the immobilizer warning light permanently on,
with panel on) turn the key first to "
OFF " and then to " ON "; if the lock cannot be dis-
abled, try with the other key supplied (brown). If the engine cannot be started, contact
an
Authorised Service Centre , which is provided with the electronic equipment re-
quired to detect and repair the system.
The Immobilizer is also activated by switching off the engine with the engine stop
switch. This happens even if the starter key is in «
ON ».
When supplementary keys are required, remember that the programming (up to a
maximum of three keys) must be performed on all the keys whether they are new or
already in your possession. Take the key with the brown grip and all the blue keys
supplied to an
Authorised Service Centre . The codes of keys not submitted for the
new programming procedure are deleted from the memory. Any lost keys will therefore
not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
SHOULD THE VEHICLE CHANGE OWNERS, IT IS ABSOLUTELY NECESSARY
THAT THE NEW OWNER GET POSSESSION OF THE KEY WITH THE BROWN
HANDGRIP (AS WELL AS ALL OTHER KEYS) AND WITH THE «CODE CARD».
21
1 Vehicle