manualshive.com logo in svg

VESPA GTS Supertech 300 hpe, Руководство пользователя, Страница: 81 / 128

Поделиться
Скачать
VESPA GTS Supertech 300 hpe Скачать руководство пользователя страница 81

CAUTION

WHEN REPLACING THE HUB OIL DO NOT LET THE OIL COME INTO CONTACT
WITH THE REAR BRAKE DISC.

03_09

Tyres (03_09)

Check tyre pressure and wear periodically as indicated in the scheduled maintenance
table. Tyres feature wear indicators; replace tyres as soon as these indicators become
visible on the tyre tread. Also check that the tyres do not show signs of splitting at the
sides or irregular tread wear; if this occurs, go to an authorised workshop or at least
to a workshop equipped to replace tyres.

CAUTION

TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.

TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.

CAUTION

AS THE WHEELS ARE FITTED WITH ABS TONE WHEELS, TYRES MUST ONLY
BE REPLACED BY AN AUTHORISED SERVICE NETWORK CENTRE.

81

3 Maintenance

Содержание GTS Supertech 300 hpe

































































































































Отзывы:

Нет отзывов