VESPA GTS Supertech 300 hpe Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 128

VESPA GTS Supertech 300 hpe Скачать руководство пользователя страница 63

02_03

The European standard

EN 16942

prescribes the identification of the vehicle com-

patibility with the fuel type, by means of a graphic symbol for consumer information.
The symbols shown on the side make facilitate the recognition of the correct fuel type
to be used on your vehicle. Before refuelling, check the symbols located near the filler
neck and compare them with the symbol shown on the filling pump.

E5:

unleaded petrol with maximum 5% ethanol.

E10

: unleaded petrol with maximum 10% ethanol.

The label on each pump dispenser shows only one value

; if for example it shows

E5 it means that the petrol supplied is unleaded, with 5% ethanol.

The label on the vehicle can instead show several values

If, for example, it shows

both E5 and E10 values, it means that the vehicle is compatible with petrol containing
up to a maximum 10% ethanol, and thus it is possible to refuel the vehicle either from
a E5 dispenser or from a E10 dispenser (but not from one showing E85).

CAUTION

ALWAYS USE PETROL WITH A MAXIMUM OF 10% BIOETHANOL CONTENT
(E10).

DO NOT USE PETROL WITH AN ETHANOL CONTENT HIGHER THAN 10%; THIS
USE COULD DAMAGE THE FUEL SYSTEM COMPONENTS AND/OR COMPRO-
MISE ENGINE PERFORMANCE.

63

2 Use

«
...
61
62
63
64
65
...
»

Содержание GTS Supertech 300 hpe

































































































































Отзывы:

Нет отзывов