VESPA GTS Supertech 300 hpe Скачать руководство пользователя страница 39

Страница: 39 / 128

"PRESS AND HOLD": PRESS THE BUTTON AND HOLD FOR AT LEAST 2 SEC-
ONDS.

Keyswitch (01_58)

The ignition switch is located on the front leg shield back plate near the bag hook.

01_58

SWITCH POSITIONS

»: Ready to start position, non-extractable key, mechanical anti-theft device

disabled. Saddle opening and case opening possible.

OFF

»: Starting disabled, key locked in barrel, mechanical antitheft device disabled.

Saddle opening and case opening possible.

CLOSE

»: Starting disabled, key removable from barrel, mechanical antitheft device

disabled. Saddle opening and case opening disabled.

LOCK

»: Starting disabled, key removable from barrel, mechanical antitheft device

enabled. Saddle opening and case opening disabled.

01_59

Locking the steering wheel (01_59)

Turn the handlebar to the left (as far as it will go), turn the key to «

LOCK

» and remove

the key.

CAUTION

NEVER TURN THE KEY TO «LOCK» OR «OFF» WHILE RIDING.

1 Vehicle

Содержание GTS Supertech 300 hpe

































































































































Результаты поиска

Содержание GTS Supertech 300 hpe

Отзывы:

VESPA GTS Supertech 300 hpe, Руководство пользователя, Страница: 39 / 128

Результаты поиска

Содержание GTS Supertech 300 hpe

Отзывы: