LaserCOMPACT Product Manual
VESDA
®
2
Version 1.0
1. Overview
The LaserCOMPACT is an aspirating smoke detector that provides all the benefits of aspirating
smoke detection, including very early warning, for small areas. The LaserCOMPACT has been
designed to protect areas up to 500sq.m (5,000sq.ft).
The detector operates by drawing air from a protected area via a pipe network. A sample of the
air is filtered to remove dust and dirt before it is passed through the laser detection chamber.
Smoke present in the detection chamber creates light scattering, which via sophisticated
electronics produces a signal representing the absolute level of smoke present.
The LaserCOMPACT can be programmed to have 2 or 3 alarm thresholds, which can be set
across its wide sensitivity range to provide both very early warning of a potential fire situation
and allow the initiation of further control procedures should the smoke level increase.
All pipe network designs for the LaserCOMPACT should be supported by the ASPIRE Pipe
Modelling program results.
VESDA products are only distributed through trained and accredited channels.
It is understood that personnel installing this equipment are familiar with the VESDA technology
and have a good understanding of local codes and standards regarding electrical cabling.
Installation engineers should be certified where appropriate.
For details of your nearest Accredited Distributors please contact Vision Systems – VESDA.
Contact details are at the back of this document.