ORIGINAL INSTRUCTIONS
18
Heatline - Duct mounted Heater with controls
Installation, Operation and Maintenance Manual
VES Andover Ltd. Eagle Close, Chandlers Ford Ind. Est, Eastleigh, Hampshire, SO53 4NF
Tel: 08448 15 60 60 Fax: 02380 26 12 04 E-mail: [email protected] Web: www.ves.co.uk
12 and 24-hour
format
Power failure
Default timer setting
If the current time of day is in 24-hour format and you wish to change it to 12-hour format, turn
the knob clockwise passed 23:59 or counterclockwise passed 00:00. If the current time of day is
in 12-hour format and you wish to change it to 24-hour format, turn the knob clockwise passed
12:00 pm or counterclockwise passed 12:00am.
4. Confirm the time of day by pressing the right button. The weekday indicator starts blinking.
5. Turn the rotary knob clock- or counterclockwise to set the current weekday.
6. Confirm the current weekday by pressing button (OK).
7. Press the program mode button (Esc) to leave the program mode.
Timers A1…A4 have the following default settings (residential use):
After a power failure, the time of day will blink to indicate power was lost. However the
auto timer will continue to run with the time before the power loss occurred. Enter the
% ~ % "
D
a
y
s
T
i
m
e
wh
e
n
t
h
er
m
ostat
is
i
n
Co
mf
ort
m
o
d
e
Mon (1)-Fri (5)
06:30-08:30 (A1)
17:30-22:30 (A2)
Sat (6)
08:00-23:00 (A3)
Sun (7)
08:00-22:30 (A4)
The thermostat is in Energy saving mode during the remaining time
Timers A5...A8 are free with no default settings
9.6 AutoTimer
Controls
9
Continued