PLEASE ENSURE THAT THIS DOCUMENT IS PASSED ON TO THE END USER
11
Maintenance 6
In general, this series of units require li le maintenance. Regular inspec on for damage
and cleaning. In the unlikely event of component failure, spares are available from stock at
VES Andover Ltd.
When enquiring about or ordering spares contact VES Spares Department, quo ng the
sales order (SO) number and unit type found on the unit nameplate.
Tel: 02380 46 11 50
Spares & repairs
WEEE Direc ve
Before a emp ng to carry out any work on our units, all accompanying documenta on
including warning labels on the unit must be referenced.
Should it be necessary to remove any component ensure that these are secured into
posi on once reinstalled. It is cri cal that a er any maintenance work has been conducted
that all components removed/replaced be refitted correctly by a competent engineer.
Important
Before a emp ng to carry out any maintenance work, inves ga ve or repair work on our
units, the unit MUST BE COMPLETELY ISOLATED
from its electrical supply. Ensure a minimum
of two minutes a er electrical disconnec on before removing access panels.
Warning
The heater duct should be cleaned at least every 6 months, however this may need to be
adjusted depending on use of the system. Refer to
TR/19
“
Guide to good prac ce - cleanliness
of ven la on system
” or similar for guidance as to the recommended frequency of maintenance.
A failure to clean the duct on a regular basis could result in loss of fan performance or cause a
poten al fire risk.
A failure to keep up with cleaning maintenance could result in the increase of poten al risks and fire
hazards. Ensure the unit is incorporated into a regular cleaning schedule.
Care must be taken when working on the unit due to poten al hot surfaces. Allow the unit to
completely cool before commencing any works.
Cau on
Cau on
ecovent
Duct Mounted Heaters
mini
