background image

Console Display and Feedback

  Indicates the 

INTERVAL 20/10

 or 

INTERVAL 20/30

 or 

INTERVAL CUSTOM

 program is selected and in used.

  Indicates the 

TARGET TIME

 or 

TARGET DISTANCE

 or 

TARGET CALORIES

 program is selected and in used.

  Indicates the current heart rate in beats per minute (bpm), which are detected by a wireless heart rate chest belt.

INTERVAL

READOUTS

H.R.

  Indicates the current section is in 

GO

 

period or 

REST

 period of the interval  

program.

 

8:88

 > Shows the count down  

GO

 or 

REST

 segment time.

 

TOTAL TIME 88:88

 >  

Shows the count up 

GO

 & 

REST

 total 

run time of the program.

 

88 /88

 > Shows the current interval 

and the total sections of intervals in 

the program. 

  Indicates the time exercised this session, 

default counts up from zero to 1:59:00 , 

but counts down if a target had been set.

   Indicates the distance travelled this 

session, default counts up from zero to 

99.99 kilometers, but counts down if a 

target had been set.

  Indicates the current speed you are  

pedalling at, in km /h.

  Indicates the approximate calories 

burned this session ( for comparison 

only, not to be used for medical pur-

pose), default counts up from zero to 

999 kcal, but counts down if a target 

had been set.

  Indicates the current energy ( power )  

generated this session, ( for compari-
son only, not to be used for medical 
purpose) default counts up from zero 
to 9999.

  Indicates the current Revolutions  

Per Minute you are pedalling at.

   Indicates the target to exercise at 65% of  

 your maximum heart rate.

   Indicates the target to exercise at 80% of  

 your maximum heart rate.

  Indicates there is no heart rate signal  

detected in this program.

  Indicates the current heart rate is in the 

target range.

  Indicates the heart rate signal has been 

detected.

  Indicates an increased pedaling 

speed is needed to bring the heart 

rate into the target range.

  Indicates an decreased pedaling 

speed is needed to lower the heart 

rate into the target range.

INTERVAL

20/10

20/30

CUSTOM

TOTAL TIME

REST

GO

READY

TARGET HR

65%

OF

80%

OF

M

AX

 HR

BPM

NO HR SIGNAL TARGET HR ACHIEVED

SPEED UP SLOW DOWN

HEART RATE

15

TARGET TIME DISTANCE CALORIES

TIME?

DISTANCE?

AVEMAX

RPM / AGE?

CALORIES?

TOTAL

AVEMAX 

SPEED

KPH

MPH

KM

MILE

Содержание VER-CAB-001





























Отзывы: