Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the screws are fully
tightened with the allen key.
!
FIXINGS:
FIXINGS:
x
1
Part
No.
J2
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the foot peg is fully
tightened with the allen key.
!
x
1
Part
No.
J4
x
1
Part
No.
J3
x
3
Part
No.
J5
3-3. Attach the Right Dual Action Handlebar
Slide the
•
right Dual Action Handlebar (D2)
onto
the pivot axle carefully.
Install the
•
Foot Peg (G)
by screwing it on, and
tighten it with the wrench as shown.
Attach the
•
End Cap (J1)
onto the
Foot Peg (G)
securely.
3-4. Install the Fix Plate & Linkage Bar
Connect the
•
right Dual Action Handlebar (D2)
and
Linkage
Bar with Fix Plate (I)
,
Disc Spacer (J4)
,
M8x30mm Screw (J2)
and
M8 Nylon Locknut (J3)
and tighten with 5mm Allen Key &
13/17 Wrench.
Doubly secure the
•
Fix Plate (I)
to the Linkage Bar with three
M6x15mm Screws (J5)
and secure with 4mm Allen Key.
( You should be able to fit these three screws for better align-
ment by loosening the front screw assembly and try again when
all four screws are in place, tighten with the allen key provided. )
FIXINGS:
TOOLS:
Wrench
13/17
9
FIXINGS:
TOOLS:
Wrench
A
D2
G
J1
D2
I
J2
J5
J3
J4
Make sure the T-Knob is in
un-lock position.
!
Please lubricate the fastenings before assembly
by applying some of the “multi-purpose grease”
to each bolt shaft.
LUBRICATE BEFORE ASSEMBLY
